• Quickly remove vanish residue, waste oil, dirt, and grime.
• Will not change the T.D.S., cause splitting or affect the PH value of coolants
• Excellent Corrosion Protection
• No HAPS ( Hazardous Air Pollutants)
• Does not contain hazardous ingredients such as EDTA, APEO, Phthalates, and

              phosphates, or chlorinated organic solvents

• Non-combustible, non-flammable, non-Alkaline, non-Acid & non-Toxic
• Contains no silicon to interfere with new coatings or paint
• Readily Biodegradable
• Low VOC ( <25g/L)
• Meet the standards of Green Seal (USA) and Green Label

 Benefits when Water Works Sump Kleener is used in CNC Machine cleaning:

• Compatible with coolant
• Cleans machine sump tank when it is still running
• Reduce downtime of machine
• Reduce cost for change of coolants
• Will not change PH-value of coolant after addition
• Will not affect staining behavior
• Negligible effect on cutting behavior
• Addition of Sump Kleener ( 1 - 1.5% ) will not cause foam

Application

Add Sump Kleener ( about  1 - 1.5% ) into the sump of CNC machine 1 - 2 days prior to machine cleaning and change of coolants and let the machine run. Drain out the old coolant and refill with new coolant before resuming machine operation.

For Example :

If the CNC sump has 10L of fluid in the machine, add in 0.1L to 0.15 L Sump Kleener into the CNC sump to begin the cleaning process.

Apply Sump Kleener full strength for CNC machine general cleaning. Sump Kleener is safe to clean CNC machines and it will not affect machine coatings and inspection windows.